- 362 - UG06A thru ug06d 0.6 amp. ultrafast plastic rectifiers voltage range 50 to 200 volts current 0.6 ampere f eatures plastic package has underwriters laboratories flammability classification 94v-0 ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes ultrafast recovery time for high efficiency excellent high temperature switching glass passivated junction high temperature soldering guaranteed: 260 /10 seconds/.375?,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension m echanical data cases: void free molded plastic body over glass passivated chip terminals: axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.0064 ounce, 0,181 gram ts-1 dimensions in inches and (millimeters) m aximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol UG06A ug06b ug06c ug06d unit s maximum recurrent peak reverse voltage v rrm 50 100 150 200 v maximum rms voltage v rms 35 70 105 140 v maximum dc blocking voltage v dc 50 100 150 200 v maximum average forward rectified current .375?(9.5mm) lead length @t l = 75 i (av) 0.6 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) @t l = 75 i fsm 40 a maximum instantaneous forward voltage @ 0.6a v f 0.95 v maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =100 i r 5.0 100 ua ua maximum reverse recovery time ( note 1 ) trr 15 ns typical junction capacitance ( note 2 ) cj 9.0 pf typical thermal resistance ( note 3 ) r ja r jl 97 28 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 notes: 1. reverse recovery test conditions: i f =0.5a, i r =1.0a, i rr =0.25a 2. measured at 1 mhz and applied reverse voltage of 4.0 volts d.c. 3. thermal resistance from junction to ambient at 0.375? (9.5mm) lead length. mount on cu-pad size 0.2? x 0.2? (5mm x 5mm) on pcb.
- 363 - fig.3- typical instantaneous forward characteristics instantaneous for ward current .(a) 0.6 0.8 1.0 0.4 1.2 1.4 1.6 0.01 1 ratings and characteristic curves (UG06A thru ug06d) fig.2- maximum non-repetitive peak forward surge current peak for ward surge current . (a) 1 10 100 1 10 number of cycles at 60hz fig.4- typical reverse characteristics instantaneous reverse current .( a) 0 20 40 60 80 100 percent of rated peak reverse voltage. (%) 0.01 1 10 1000 0.1 0.1 10 fig.5- typical junction capacitance junction cap acitance.(pf) 0.1 1 10 100 10 100 reverse voltage. (v) tj=25 c f=1.0mhz vsig=50mvp-p 0 forward voltage. (v) 1 tj=100 c 0 tj=50 0 c tj=100 c 0 100 tj=50 c 0 pulse width=300 s 1% duty cycle fig.1- maximum forward current derating curve average for ward rectified current amperes 0 0 temperature. ( c) o 0.15 0.3 0.45 0.6 0.75 0.9 25 50 75 100 125 150 175 resistive or inductive load 0.375" (9.5mm) lead length ta, ambient temperature p.c.b. mounted 0.7 x 0.7" (8x8mm) copper pad tl=75 c 8.3ms single half sine wave jedec method 0 100 100 tl, lead temperature
|